Products

  1. Home
  2. Products

Air inlets


ZWRHV 40 / KWHRVA 02 ist ein Außenluftdurchlass für die Wand Kategorienbild

EHT

Wall humidity sensitive air inlet

Installed on the wall or on a rolling shutter casing, the EHT humidity sensitive air inlet is the ideal choice for air admission through the wall, and thus provides an alternative where lack of available space (on window frames) prevents the installation of window mounted air inlets.

Produktbild ZFH/ZFHV/ZFHA/ZFHVA Bild der Produktseite Einbausituation

EHA²

Acoustic humidity sensitive air inlet for windows

The stylish design of the EHA² air inlet enables perfect integration on most windows or rolling shutter casings. With the inclusion of high efficiency acoustic foam the product reaches an acoustic attenuation of up to 42 dB when mounted with the special base and canopy. An optional device allows on demand manually closing or opening of the air inlet, complementing the humidity sensitive function available on the EHA².

Außenluftdurchlass ZUROH 100 / ZUROH 110 für den Rollladenkasten Kategorienbild mit EInbausituation am Fenster

EAH²

Humidity sensitive air inlet for rolling shutter casings

With its flat design and its special airtightness sleeve, the EAH² air inlet is perfectly fitted to equip rolling shutter casings.

EMM²

Humidity sensitive air inlet for windows

With its slim design (only 31 mm thickness), the EMM² is optimised to discreetly integrate on windows.

Exhaust units


BXC

Demand controlled exhaust unit for MEV

The BXC exhaust unit incorporates all the functions one could request from an air exhaust unit. With various activation modes such as humidity, presence, CO2 and VOC for example, the BXC exhaust unit automaticaly adjusts the level of ventilation according to occupants’ needs in all situations, all rooms.

TDA

Exhaust unit with presence detection for MEV

The TDA exhaust units directly adjust the extracted airflow to the level of human presence detected in the room. The airflow level in “presence” mode can be adjusted at every moment according to the usual number of occupants in the room (1 to 4 persons per vent).

Exhaust Fans with heat pump


AWN ECO+

Exhaust fans with heat recovery

The AWN Eco+ is a compact and fully integrated exhaust air heat pump. Here, the ventilation unit and the heat pump are combined in one. This components’ closeness allows a direct transmission of the exhaust air heat to the refrigerant which enhances the device efficiency and energy saving. The ventilation adapts the airflows according to the needs in the dwelling thanks to Aereco’s humidity-sensitive exhaust air system: the on-demand management is ensured at any time.

The heat provided throughout the year is then released by the heat pump directly to the heating water of the building heating system. The AWN Eco+ drastically reduces the energy load for heating water.

AWN BASIC

Exhaust fans with heat recovery

AWN Connect combines AWN Basic with Connect WP, a brine / saltwater / water heat pump designed specifically for AWN. While the AWN Basic is installed where the exhaust ducts end - above or under the roof - the Connect WP is designed for indoor installation and can be placed in the boiler room. On the cold source side, the Connect WP cools a brine circuit up to 2 ° C and feeds the cold brine to the AWN Basic heat exchanger using an integrated feed pump. The heat is extracted from the stale air and returned to the heat pump. The heat pump raises the temperature level of the heat produced and makes it available the whole year through the heating water to the building's heating system.

AWN CONNECT

Exhaust fans with heat recovery

AWN Connect combines AWN Basic with Connect WP, a brine / saltwater / water heat pump designed specifically for AWN. While the AWN Basic is installed where the exhaust ducts end - above or under the roof - the Connect WP is designed for indoor installation and can be placed in the boiler room.

On the cold source side, the Connect WP cools a brine circuit up to 2 ° C and feeds the cold brine to the AWN Basic heat exchanger using an integrated feed pump. The heat is extracted from the stale air and returned to the heat pump. The heat pump raises the temperature level of the heat produced and makes it available the whole year through the heating water to the building's heating system.

Canopies and inlet channels


E-TFR

Window telescopic sleeve

By ensuring the continuity of the airflow from the outside canopy to the air inlet, the E-TFR protects the interior of the window and avoids cooling to prevent internal condensation.