Choose by category

Exhaust fans

Heat recovery units

Ducting & Accessories

Exhaust Fans with heat pump

Non residential systems

Sensors

Canopies and inlet channels

Choose by system

Individual mechanical exhaust ventilation Collective mechanical exhaust ventilation Heat recovery ventilation Exhaust fans with heat recovery Hybrid ventilation Natural Ventilation

Choose by name or reference

DX HUB

ACTIVATE AIR SUPPLY DISTRIBUTION BOX

How does the DX System control room-by-room supply and exhaust airflows

If the units used for exhaust are the same as those used in Aereco’s mechanical exhaust ventilation system, the airflow supply in the DX System “Excellence” is controlled by a specific device: the DX Hub distribution box. Using up to 5 or 6 demand controlled dampers connected to supply units, it allocates the airflow in each room according to the data received by CO2 or presence sensors located in bedrooms and in the living room. An additional valve* is integrated to ensure the balance between total exhaust and supply air.

Both Hub 5 and Hub 6 are compatible with the Excellence version of DXA and DXR heat recovery units.

CONTACT-US

DynamiX® Technology: ensures a silent system and optimal indoor air quality through room-by-room demand control.

Noise attenuation through low pressure operation (DX Hub 5) and built in silencers (DX Hub 6).

Easy installation thanks to multiple positioning.

Easy maintenance with many unscrewable metal parts.

High-quality manufacture with main parts made of metal.

Description

Characteristics

Schematic

Accessories

Gallery

Documents

DX Hub range

Two products complete the DX Hub range, both are compatible to DXR and DXA. The DX Hub 5, with its outlets of D100 mm, fits perfectly for galvanized ductwork, while the DX Hub 6, with its outlets of D75 mm, is more dedicated to installation with semi-flexible ducts.
*specific to DX Hub 5

Quietness

The DX Hub is the pillar of the DynamiX® Technology. With a very accurate and smart management of motorized dampers and with acoustic silencers (DX Hub 6), it ensures a soundless operation by the DX System.

Installation

Thanks to the multiple localization of their inlets, it has never been so easy to install a heat recovery ventilation system. Whatever the heat recovery unit, the DX Hubs can be installed in a vertical or horizontal position. With different mounting brackets, the DX Hub range suits for both ceiling and wall mounting.

Quality

With a base made of metal, the DX Hub range ensures a reliable quality and maximum durability. Most of the components are manufactured in Germany and assembled in Aereco, in France.

Active air supply distribution box		DX HUB 5	DX HUB 6
Standard code		HUB1288	HUB1434
Airflow characteristics
Pressure at supply	Pa	25	65
Acoustics
Phonic enveloppe		■	■
Phonic silencers		–	■
Electrics
Electrical connections (sensors)		5 x RJ12	5 x RJ12
Characteristics
Weight	kg	10.9	18
Dimension (W x L x H)	mm	592 x 490 x 206	695 x 684 x 199
Colour		Metal	Metal
Material (main)		Galvanised steel with phonic and thermal insulation	Galvanised steel with phonic and acoustics silencers
Inlet duct connections (to DXR or DXA)	mm	Choice among 2 x ø160 mm	Choice among 3 x ø160 mm
Outlet duct connections (to the supply units)	mm	5 x ø100 mm + 1 x ø125 mm	6 x ø75 mm
Installation
Installation		Horizontal or vertical	Horizontal or vertical
Installation room		Frost Free: +5°c < T° < +50°C	Frost Free: +5°c < T° < +50°C
In option		Fixing system for DX System	Fixing system for DX System