Silent: only 29 dB (A) @ 100m3/h.


Low energy consumption: only 23 W @ 100m3/h.


Constant pressure: fitted to demand controlled exhaust units.


Easy to install: easy to handle and can be directly installed in living space (in a wall cupboard, corridor, etc.).


Choice of 3 settings at the time of installation: 80, 100 and 120 Pa.


Outlet 125 mm in diameter

Inlets 100 or 125 mm.


Description
Characteristics
Schematic
Accessories
Gallery
Documents

Intelligent motor

The VAM is driven by a single-phase asynchronous motor the speed of which is held constant by a tachometer and an electronic board, whatever the airflow required by the exhaust units @ 100m3/h. The power is adjusted and optimised to limit noise and energy consumption.

3 pressures available

The VAM provides a choice of three pressure levels at the time of installation: 80, 100, or 120 Pa. This feature can be used to satisfy specific regulations or to compensate for complex ductwork.

Installation close to the occupant

Because the VAM is silent (acoustic foam) and compact, it is easy to install directly in the living space of the dwelling, in a wall cupboard, a loft space, etc. Maintenance is facilitated by its location within the dwelling.

Acoustic exhaust fan   VAM 230V
Standard code   VAM767
Airflow characteristics    
Max. airflow @ 100 Pa m3/h 250
Max. pressure Pa 130
Available pressure settings Pa 80 – 100 – 120
Acoustics    
Sound power level Lwa dB 39
Sound pressure level Lp (r = 2m) [airflow in m3/h) dB(A) 29 [100] ; 33 [200]
Electrics    
Power supply   230 VAC / 50 Hz 230 VAC / 60 Hz
Motor type   asynchronous single-phase
Power consumption [airflow in m3/h] W 23 [100] ; 44 [200]
IP degrees of protection   IP30
Characteristics    
Weight kg 18
Colour   metal
Material (main)   galvanised steel
Dimensions mm 480 x 480 x 240
ErP specifications    
SEC, Climat   Cold: -53,24 / Average: -26,18 / Warm: -10,67
ErP Classification from 01/01/2016*   B
ErP information   Upload ErP directive on related documents
ErP label   Upload ErP labels on related documents
Installation    
Max. available duct connections   7
Max. connectable exhaust units (airflow capacity)   6
Inlet* mm ø125
Outlet mm ø125
Installation   inside the heated volume / in protected non-inhabitable place (attic, etc.) / wall / ceiling / floor
Maintenance    
Filter  
Cleaning   easy-to-open cover (4 screws)
Operation    
Direct-drive impeller  
Max. speed RPM 1100

■ standard
*Regulation based on at least two demand controlled exhaust units
**Available accessories: ø80, ø100 and ø125 mm

AIRFLOW / DIMENSIONS IN MM

Image Code Designation
AEA808 AEA808 Metal sleeve ø125-125 mm – L.80 mm
AEA809 AEA809 Metal sleeve ø125-100 mm – L.100 mm
AEA810 AEA810 Metal sleeve ø125-80 mm – L.110 mm
VAM

Installation instructions – D4266_E // EN – FR – D

VAM

Disassembly instructions – TF6000_A

VAM

ErP Label VAM767EX – D5829_C

VAM

Product booklet – FLY615GB_V1

Compatible ventilation systems: